Power Frost Frostproofer Concentrate

Concentrated frostproofer for increasing frost resistance and setting times of concrete and mortars.

A premium quality, non-corrosive, 5 times stronger concentrate additive that increases frost resistance and accelerates the setting time of cements by improving the rate of hydration. Conforms to EN934-2:2009 + A1:2012, Class T6.

Features & Benefits: Developed for brick laying and rendering subjected to low and sub-zero temperatures - Increases rate of curing of mortar to reduce the possibility of cracking caused by frost - Chloride free formulation - Non-corrosive - Will not attack and degrade steel wall ties, reinforcements and other steel items - Works by exothermic reaction - UKCA Approved.

Uses: To facilitate all year round construction where low, ambient temperature may normally cause a lull in the rate of production. Bond It POWER-FROST increases the rate of hydration, accelerating the rate of cure as well as allowing a reduction in the total volume of gauging water required, therefore, improving the frost resistance of the mortar/concrete. Due to the final mortar/concrete being more dense the final result is an improved oil and water resistant product. When mixed neat with Portland cement it can be used to plug holes caused by pressure leaks. Added to the mix POWER-FROST will improve workability and increase strength gain and resistance to water penetration. It allows up to 15% reduction in gauging water, and can also reduce curing times and shrinkage. Use the appropriate sand/cement ratio for dense, high quality mortar.